latest company case about Dongguan Mansheng Automation Equipment Co., Ltd Certifications

Wooden table legs are key visual and structural elements of dining tables, desks and other furniture. Their surface treatment must be smooth and even, because any thin spot, run or color difference is immediately visible. Table legs are typically long turned or shaped parts with curved profiles, and furniture factories often finish them in batches with primer and topcoat layers. Coating such parts consistently by hand is difficult and slow. For furniture manufacturers, adopting a six-axis rotary table spray painting machine is a practical way to stabilize finish quality and raise throughput.

The Challenge: Even Surface Treatment on Wooden Table Legs

Wooden table legs are produced in high volumes and many styles, which makes surface treatment quality hard to stabilize. Factories relying on manual spraying typically struggle with:

• Uneven film on turned profiles: Operators find it difficult to keep a uniform coating across curved and shaped leg surfaces, causing thin spots, sagging or runs.
• Inconsistent finish between batches: Spray distance, speed and paint feed vary with each operator and session, so the same finish can look different between batches.
• Low throughput on long parts: Handling and spraying long legs one by one slows down production and increases labor cost.

The Solution: Six-Axis Rotary Table Spray Painting Machine

To meet the surface treatment requirements of wooden table legs, furniture manufacturers can adopt the ManSheng 300X6, a six-axis rotary table automatic spray painting machine designed for high-volume industrial coating applications.

Key equipment features applied in this furniture finishing scenario:

• Dual-station continuous production: The rotary table design allows loading and unloading at one station while the other station is spraying, maximizing throughput for continuous operation.
• Dual reciprocating spray guns: Two guns provide independent oil output control, allowing flexible coating of complex leg profiles in one cycle.
• Six-axis precision drive: Closed-loop stepper drive on six axes (X, Y, Z, A, W, T) achieves ±0.2mm positioning accuracy for consistent coating quality.
• Wide spray coverage: A φ300×350mm spray range with 400×220×560mm effective travel covers common table leg sizes and shapes.
• Stored programs for quick changeover: The ManSheng touch screen control system stores 10,000 programs with USB communication, so parameters for different leg styles can be recalled instantly.
• Industrial-grade components: Leadshine motors, HIWIN guide rails and NSK bearings, together with CHINT, Delixi and Omron electrical components, ensure long-term reliability.

Results Manufacturers Can Expect

With the rotary table spray painting machine, furniture factories move from operator-dependent finishing to controlled, repeatable coating:

• Smooth, uniform finish: Fixed spraying parameters eliminate manual variation, reducing thin spots, sagging and color difference on leg surfaces.
• Higher throughput: Dual-station continuous production shortens cycle time and increases daily output per machine.
• Lower reject rate: Stable film thickness and fewer coating defects mean less rework of finished legs.
• Fast style changeover: Stored programs allow quick switching between leg designs for flexible batch production.

Equipment Configuration at a Glance

Get a Furniture Finishing Solution for Your Factory

Every furniture factory has its own leg designs, coating system and floor space. To receive an accurate solution and quotation, please provide the following information:

• Table leg type, size and wood material
• Product photos or short videos
• Coating system (primer, topcoat, water-based or solvent-based)
• Required daily output and workshop operating hours

Leave a message on our website or contact us via WhatsApp: +852 5132 5958. Our engineering team will review your production conditions and share a feasible spraying solution for your factory.